dmesg - NVIDIA GeForce GTX 570 SLI
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.8.11-1
Command line: BOOT_IMAGE=/vmlinuz-3.8-1-amd64 root=/dev/mapper/root-root ro single iommu=pt
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bd71afff] usable
BIOS-e820: [mem 0x00000000bd71b000-0x00000000bd76dfff] ACPI NVS
BIOS-e820: [mem 0x00000000bd76e000-0x00000000bd776fff] ACPI data
BIOS-e820: [mem 0x00000000bd777000-0x00000000bd777fff] ACPI NVS
BIOS-e820: [mem 0x00000000bd778000-0x00000000bdad6fff] reserved
BIOS-e820: [mem 0x00000000bdad7000-0x00000000bdae7fff] ACPI NVS
BIOS-e820: [mem 0x00000000bdae8000-0x00000000bdafcfff] reserved
BIOS-e820: [mem 0x00000000bdafd000-0x00000000bdafefff] ACPI NVS
BIOS-e820: [mem 0x00000000bdaff000-0x00000000bdb07fff] reserved
BIOS-e820: [mem 0x00000000bdb08000-0x00000000bdb0dfff] ACPI NVS
BIOS-e820: [mem 0x00000000bdb0e000-0x00000000bdb6efff] reserved
BIOS-e820: [mem 0x00000000bdb6f000-0x00000000bdd71fff] ACPI NVS
BIOS-e820: [mem 0x00000000bdd72000-0x00000000bdefffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: To be filled by O.E.M. To be filled by O.E.M./Crosshair V Formula, BIOS 1703 10/17/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CDFFF write-protect
CE000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BDF00000 mask FFFFFFF00000 uncachable
3 base 0000BE000000 mask FFFFFE000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000023f000000 aka 9200M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xbdf00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbdf00 max_arch_pfn = 0x400000000
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xbdefffff]
[mem 0x00000000-0x7fffffff] page 1G
[mem 0x80000000-0xbddfffff] page 2M
[mem 0xbde00000-0xbdefffff] page 4k
kernel direct mapping tables up to 0xbdefffff @ [mem 0x1fffd000-0x1fffffff]
init_memory_mapping: [mem 0x100001000-0x23effffff]
[mem 0x100001000-0x1001fffff] page 4k
[mem 0x100200000-0x13fffffff] page 2M
[mem 0x140000000-0x1ffffffff] page 1G
[mem 0x200000000-0x23effffff] page 2M
kernel direct mapping tables up to 0x23effffff @ [mem 0xbdefc000-0xbdefffff]
RAMDISK: [mem 0x36802000-0x373f8fff]
ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
ACPI: XSDT 00000000bd76e070 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000bd775348 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20121018/tbfadt-598)
ACPI: DSDT 00000000bd76e158 071EC (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000bdb08f80 00040
ACPI: APIC 00000000bd775440 0009E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000bd7754e0 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 00000000bd775520 00038 (v01 ALASKA A M I 01072009 AMI 00000004)
ACPI: SSDT 00000000bd775690 01714 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: IVRS 00000000bd7755b0 000E0 (v01 AMD RD890S 00202031 AMD 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023effffff]
Initmem setup node 0 [mem 0x00000000-0x23effffff]
NODE_DATA [mem 0x23effc000-0x23effffff]
[ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880236600000-ffff88023d5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x23effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0xbd71afff]
node 0: [mem 0xbdd72000-0xbdefffff]
node 0: [mem 0x100001000-0x23effffff]
On node 0 totalpages: 2082869
DMA zone: 56 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3919 pages, LIFO batch:0
DMA32 zone: 10559 pages used for memmap
DMA32 zone: 761706 pages, LIFO batch:31
Normal zone: 17864 pages used for memmap
Normal zone: 1288759 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bd71b000 - 00000000bd76e000
PM: Registered nosave memory: 00000000bd76e000 - 00000000bd777000
PM: Registered nosave memory: 00000000bd777000 - 00000000bd778000
PM: Registered nosave memory: 00000000bd778000 - 00000000bdad7000
PM: Registered nosave memory: 00000000bdad7000 - 00000000bdae8000
PM: Registered nosave memory: 00000000bdae8000 - 00000000bdafd000
PM: Registered nosave memory: 00000000bdafd000 - 00000000bdaff000
PM: Registered nosave memory: 00000000bdaff000 - 00000000bdb08000
PM: Registered nosave memory: 00000000bdb08000 - 00000000bdb0e000
PM: Registered nosave memory: 00000000bdb0e000 - 00000000bdb6f000
PM: Registered nosave memory: 00000000bdb6f000 - 00000000bdd72000
PM: Registered nosave memory: 00000000bdf00000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
PM: Registered nosave memory: 00000000fec11000 - 00000000fec20000
PM: Registered nosave memory: 00000000fec20000 - 00000000fec21000
PM: Registered nosave memory: 00000000fec21000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
PM: Registered nosave memory: 0000000100000000 - 0000000100001000
e820: [mem 0xbdf00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88023ec00000 s84032 r8192 d22464 u262144
pcpu-alloc: s84032 r8192 d22464 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2054384
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.8-1-amd64 root=/dev/mapper/root-root ro single iommu=pt
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ f8000000 size 64 MB
Memory: 8129016k/9420800k available (3629k kernel code, 1089324k absent, 202460k reserved, 3109k data, 616k init)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
NR_IRQS:33024 nr_irqs:1288 16
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 4013.576 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8027.15 BogoMIPS (lpj=16054304)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 00bdf00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20121018
[Firmware Bug]: AMD-Vi: IOAPIC[9] not in IVRS table
[Firmware Bug]: AMD-Vi: IOAPIC[10] not in IVRS table
[Firmware Bug]: AMD-Vi: No southbridge IOAPIC found in IVRS table
AMD-Vi: Disabling interrupt remapping due to BIOS Bug(s)
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-8150 Eight-Core Processor (fam: 15, model: 01, stepping: 02)
Performance Events:
perf: AMD core performance counters detected
AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
Brought up 8 CPUs
smpboot: Total of 8 processors activated (64217.21 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbd71b000-0xbd76dfff] (339968 bytes)
PM: Registering ACPI NVS region [mem 0xbd777000-0xbd777fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xbdad7000-0xbdae7fff] (69632 bytes)
PM: Registering ACPI NVS region [mem 0xbdafd000-0xbdafefff] (8192 bytes)
PM: Registering ACPI NVS region [mem 0xbdb08000-0xbdb0dfff] (24576 bytes)
PM: Registering ACPI NVS region [mem 0xbdb6f000-0xbdd71fff] (2109440 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xf7ffffff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0b.0: [1002:5a1f] type 01 class 0x060400
pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 10: [io 0xf040-0xf047]
pci 0000:00:11.0: reg 14: [io 0xf030-0xf033]
pci 0000:00:11.0: reg 18: [io 0xf020-0xf027]
pci 0000:00:11.0: reg 1c: [io 0xf010-0xf013]
pci 0000:00:11.0: reg 20: [io 0xf000-0xf00f]
pci 0000:00:11.0: reg 24: [mem 0xf510b000-0xf510b3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xf510a000-0xf510afff]
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xf5109000-0xf51090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xf5108000-0xf5108fff]
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xf5107000-0xf51070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xf5100000-0xf5103fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 10: [mem 0xf5106000-0xf5106fff]
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 10: [mem 0xf5105000-0xf5105fff]
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 10: [mem 0xf5104000-0xf51040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [10de:1086] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xd8000000-0xd9ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.1: [10de:0e09] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
pci 0000:02:00.0: [8086:150c] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [mem 0xf7500000-0xf751ffff]
pci 0000:02:00.0: reg 18: [io 0xd000-0xd01f]
pci 0000:02:00.0: reg 1c: [mem 0xf7520000-0xf7523fff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PCI bridge to [bus 02]
pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:05.0: bridge window [mem 0xf7500000-0xf75fffff]
pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:03:00.0: reg 10: [mem 0xf7400000-0xf7407fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:00:06.0: PCI bridge to [bus 03]
pci 0000:00:06.0: bridge window [mem 0xf7400000-0xf74fffff]
pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:04:00.0: reg 10: [mem 0xf7300000-0xf7307fff 64bit]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:07.0: bridge window [mem 0xf7300000-0xf73fffff]
pci 0000:05:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:05:00.0: reg 10: [mem 0xf7200000-0xf7207fff 64bit]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 05]
pci 0000:00:09.0: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:06:00.0: [10de:1086] type 00 class 0x030000
pci 0000:06:00.0: reg 10: [mem 0xf4000000-0xf4ffffff]
pci 0000:06:00.0: reg 14: [mem 0xc0000000-0xc7ffffff 64bit pref]
pci 0000:06:00.0: reg 1c: [mem 0xc8000000-0xc9ffffff 64bit pref]
pci 0000:06:00.0: reg 24: [io 0xc000-0xc07f]
pci 0000:06:00.0: reg 30: [mem 0xf5000000-0xf507ffff pref]
pci 0000:06:00.1: [10de:0e09] type 00 class 0x040300
pci 0000:06:00.1: reg 10: [mem 0xf5080000-0xf5083fff]
pci 0000:00:0b.0: PCI bridge to [bus 06]
pci 0000:00:0b.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0b.0: bridge window [mem 0xf4000000-0xf50fffff]
pci 0000:00:0b.0: bridge window [mem 0xc0000000-0xc9ffffff 64bit pref]
pci 0000:07:05.0: [1102:0002] type 00 class 0x040100
pci 0000:07:05.0: reg 10: [io 0xb000-0xb01f]
pci 0000:07:05.0: supports D1 D2
pci 0000:07:05.1: [1102:7002] type 00 class 0x098000
pci 0000:07:05.1: reg 10: [io 0xb020-0xb027]
pci 0000:07:05.1: supports D1 D2
pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xf7ffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC07._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC09._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0B._PRT]
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:06:00.0
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbd71b000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbdf00000-0xbfffffff]
e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c51] has been reserved
system 00:01: [io 0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cd5] has been reserved
system 00:01: [io 0x0cd6-0x0cd7] has been reserved
system 00:01: [io 0x0cd8-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x089f] has been reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [io 0x0900-0x090f] has been reserved
system 00:01: [io 0x0910-0x091f] has been reserved
system 00:01: [io 0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0290-0x02af] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfeb20000-0xfeb23fff] could not be reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 02]
pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:05.0: bridge window [mem 0xf7500000-0xf75fffff]
pci 0000:00:06.0: PCI bridge to [bus 03]
pci 0000:00:06.0: bridge window [mem 0xf7400000-0xf74fffff]
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:07.0: bridge window [mem 0xf7300000-0xf73fffff]
pci 0000:00:09.0: PCI bridge to [bus 05]
pci 0000:00:09.0: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:0b.0: PCI bridge to [bus 06]
pci 0000:00:0b.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0b.0: bridge window [mem 0xf4000000-0xf50fffff]
pci 0000:00:0b.0: bridge window [mem 0xc0000000-0xc9ffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 07]
pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xf7ffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd9ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xf7500000-0xf75fffff]
pci_bus 0000:03: resource 1 [mem 0xf7400000-0xf74fffff]
pci_bus 0000:04: resource 1 [mem 0xf7300000-0xf73fffff]
pci_bus 0000:05: resource 1 [mem 0xf7200000-0xf72fffff]
pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:06: resource 1 [mem 0xf4000000-0xf50fffff]
pci_bus 0000:06: resource 2 [mem 0xc0000000-0xc9ffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:07: resource 4 [io 0x0000-0x03af]
pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:07: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:07: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:07: resource 10 [mem 0xc0000000-0xf7ffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 12252k freed
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
pci 0000:00:00.2: irq 72 for MSI/MSI-X
AMD-Vi: Initialized for Passthrough Mode
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb971b000-0xbd71b000] (64MB) mapped at [ffff8800b971b000-ffff8800bd71afff]
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
audit: initializing netlink socket (disabled)
type=2000 audit(1372957471.708:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15900
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
GHES: HEST is not enabled!
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2013-07-04 17:04:32 UTC (1372957472)
Freeing unused kernel memory: 616k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 456k freed
Freeing unused kernel memory: 528k freed
udevd[92]: starting version 175
e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
e1000e 0000:02:00.0: Disabling ASPM L0s
e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:02:00.0: irq 73 for MSI/MSI-X
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
scsi0 : ahci
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xf510b000 port 0xf510b100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xf510b000 port 0xf510b180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xf510b000 port 0xf510b200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xf510b000 port 0xf510b280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xf510b000 port 0xf510b300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xf510b000 port 0xf510b380 irq 19
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2
QUIRK: Enable AMD PLL fix
ohci_hcd 0000:00:12.0: irq 18, io mem 0xf510a000
ehci-pci: EHCI PCI platform driver
microcode: CPU0: patch_level=0x06000629
platform microcode: firmware: agent loaded amd-ucode/microcode_amd_fam15h.bin into memory
microcode: CPU1: patch_level=0x06000629
microcode: CPU2: patch_level=0x06000629
microcode: CPU3: patch_level=0x06000629
microcode: CPU4: patch_level=0x06000629
microcode: CPU5: patch_level=0x06000629
microcode: CPU6: patch_level=0x06000629
microcode: CPU7: patch_level=0x06000629
microcode: Microcode Update Driver: v2.00 , Peter Oruba
xhci_hcd 0000:03:00.0: irq 74 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 76 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 78 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 79 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 80 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 81 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.8-1-amd64 xhci_hcd
usb usb1: SerialNumber: 0000:03:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.8-1-amd64 xhci_hcd
usb usb3: SerialNumber: 0000:03:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 3.8-1-amd64 ohci_hcd
usb usb2: SerialNumber: 0000:00:12.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 20, io mem 0xf5108000
e1000e 0000:02:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 54:04:a6:da:99:5c
e1000e 0000:02:00.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:02:00.0 eth0: MAC: 4, PHY: 8, PBA No: FFFFFF-0FF
xhci_hcd 0000:04:00.0: irq 82 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 83 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 84 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 85 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 86 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 87 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 88 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 89 for MSI/MSI-X
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.8-1-amd64 xhci_hcd
usb usb4: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.8-1-amd64 xhci_hcd
usb usb6: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.8-1-amd64 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
xhci_hcd 0000:05:00.0: xHCI Host Controller
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xf5106000
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 8
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 3.8-1-amd64 ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 9
ohci_hcd 0000:00:16.0: irq 22, io mem 0xf5105000
xhci_hcd 0000:05:00.0: irq 90 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 91 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 92 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 93 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 94 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 95 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 96 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 97 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.8-1-amd64 xhci_hcd
usb usb8: SerialNumber: 0000:05:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 10
usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 3.8-1-amd64 xhci_hcd
usb usb10: SerialNumber: 0000:05:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: OHCI Host Controller
usb usb9: Manufacturer: Linux 3.8-1-amd64 ohci_hcd
usb usb9: SerialNumber: 0000:00:16.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 4 ports detected
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 11
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xf5109000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb11: New USB device found, idVendor=1d6b, idProduct=0002
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: EHCI Host Controller
usb usb11: Manufacturer: Linux 3.8-1-amd64 ehci_hcd
usb usb11: SerialNumber: 0000:00:12.2
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 12
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 21, io mem 0xf5107000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb12: New USB device found, idVendor=1d6b, idProduct=0002
usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb12: Product: EHCI Host Controller
usb usb12: Manufacturer: Linux 3.8-1-amd64 ehci_hcd
usb usb12: SerialNumber: 0000:00:13.2
hub 12-0:1.0: USB hub found
hub 12-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 13
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 23, io mem 0xf5104000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb13: New USB device found, idVendor=1d6b, idProduct=0002
usb usb13: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb13: Product: EHCI Host Controller
usb usb13: Manufacturer: Linux 3.8-1-amd64 ehci_hcd
usb usb13: SerialNumber: 0000:00:16.2
hub 13-0:1.0: USB hub found
hub 13-0:1.0: 4 ports detected
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5
ata6.00: ATAPI: Optiarc DVD RW AD-7261S, 1.03, max UDMA/100
ata4.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133
ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133
ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
ata6.00: configured for UDMA/100
scsi 3:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5
scsi 5:0:0:0: CD-ROM Optiarc DVD RW AD-7261S 1.03 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
sr 5:0:0:0: Attached scsi generic sg3 type 5
sdc: sdc1 sdc2 sdc3 sdc4
sd 4:0:0:0: [sdc] Attached SCSI disk
sdb: sdb1 sdb2 sdb3 sdb4
sd 3:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 sda3 sda4
sd 1:0:0:0: [sda] Attached SCSI disk
md: md0 stopped.
md: bind
md: bind
md: bind
md: raid1 personality registered for level 1
md/raid1:md0: active with 3 out of 3 mirrors
md0: detected capacity change from 0 to 209649664
md0: unknown partition table
md: md1 stopped.
md: bind
md: bind
md: bind
md/raid1:md1: active with 3 out of 3 mirrors
md1: detected capacity change from 0 to 262143934464
md1: unknown partition table
md: md2 stopped.
md: bind
md: bind
md: bind
md/raid1:md2: active with 3 out of 3 mirrors
md2: detected capacity change from 0 to 733653958656
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
md2: unknown partition table
bio: create slab at 1
tsc: Refined TSC clocksource calibration: 4013.615 MHz
Switching to clocksource tsc
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-0): mounted filesystem with ordered data mode
usb 2-1: new low-speed USB device number 2 using ohci_hcd
usb 2-1: New USB device found, idVendor=046d, idProduct=c50e
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB Receiver
usb 2-1: Manufacturer: Logitech
usb 2-2: new full-speed USB device number 3 using ohci_hcd
usb 2-2: New USB device found, idVendor=046d, idProduct=c223
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: Logitech G15 Keyboard
usb 2-2: Manufacturer: Logitech
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
udevd[485]: starting version 175
usb 5-3: new low-speed USB device number 2 using ohci_hcd
usb 5-3: New USB device found, idVendor=051d, idProduct=0002
usb 5-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 5-3: Product: Back-UPS BR 800 FW:9.o5 .I USB FW:o5
usb 5-3: Manufacturer: American Power Conversion
usb 5-3: SerialNumber: 3B0951X21918
usb 2-2.1: new low-speed USB device number 4 using ohci_hcd
usb 2-2.1: New USB device found, idVendor=046d, idProduct=c221
usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2.1: Product: Logitech Gaming Keyboard
usb 2-2.1: Manufacturer: Logitech
usb 2-2.3: new low-speed USB device number 5 using ohci_hcd
usb 2-2.3: New USB device found, idVendor=046d, idProduct=c012
usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2.3: Product: USB-PS/2 Optical Mouse
usb 2-2.3: Manufacturer: Logitech
usb 2-2.4: new full-speed USB device number 6 using ohci_hcd
EDAC MC: Ver: 3.0.0
MCE: In-kernel MCE decoding enabled.
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
wmi: Mapper loaded
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
gameport gameport0: EMU10K1 is pci0000:07:05.1/gameport0, io 0xb020, speed 784kHz
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SMRG 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
input: PC Speaker as /devices/platform/pcspkr/input/input2
ACPI: acpi_idle registered with cpuidle
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
usb 2-2.4: New USB device found, idVendor=046d, idProduct=c222
usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2.4: Product: G15 Keyboard
usb 2-2.4: Manufacturer: G15 Keyboard
sp5100_tco: initialized (0xffffc90000c6eb00). heartbeat=60 sec (nowayout=0)
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0[ 5.209712] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input3
asus_wmi: Disabling ACPI video driver
acpi-cpufreq: overriding BIOS provided _PSD data
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb2/2-1/2-1:1.0/input/input4
hid-generic 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-1/input0
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5
hid-generic 0003:051D:0002.0002: hiddev0,hidraw1: USB HID v1.10 Device [American Power Conversion Back-UPS BR 800 FW:9.o5 .I USB FW:o5 ] on usb-0000:00:13.0-3/input0
input: Logitech Logitech Gaming Keyboard as /devices/pci0000:00/0000:00:12.0/usb2/2-2/2-2.1/2-2.1:1.0/input/input6
hid-generic 0003:046D:C221.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech Logitech Gaming Keyboard] on usb-0000:00:12.0-2.1/input0
input: Logitech Logitech Gaming Keyboard as /devices/pci0000:00/0000:00:12.0/usb2/2-2/2-2.1/2-2.1:1.1/input/input7
hid-generic 0003:046D:C221.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [Logitech Logitech Gaming Keyboard] on usb-0000:00:12.0-2.1/input1
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb2/2-2/2-2.3/2-2.3:1.0/input/input8
hid-generic 0003:046D:C012.0005: input,hidraw4: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-2.3/input0
input: G15 Keyboard G15 Keyboard as /devices/pci0000:00/0000:00:12.0/usb2/2-2/2-2.4/2-2.4:1.0/input/input9
hid-generic 0003:046D:C222.0006: input,hiddev0,hidraw5: USB HID v1.11 Keypad [G15 Keyboard G15 Keyboard] on usb-0000:00:12.0-2.4/input0
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input17
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
nvidia: module license 'NVIDIA' taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input18
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input19
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input20
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input21
hda_intel: Disabling MSI
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
vgaarb: transferring owner from PCI:0000:01:00.0 to PCI:0000:06:00.0
hda-intel 0000:06:00.1: Handle VGA-switcheroo audio client
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0b.0/0000:06:00.1/sound/card3/input22
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0b.0/0000:06:00.1/sound/card3/input23
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0b.0/0000:06:00.1/sound/card3/input24
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0b.0/0000:06:00.1/sound/card3/input25
nvidia 0000:06:00.0: enabling device (0000 -> 0003)
vgaarb: device changed decodes: PCI:0000:06:00.0,olddecodes=io+mem,decodes=none:owns=none
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.88 Wed Mar 27 14:26:46 PDT 2013
input: G15 Extra Keys as /devices/virtual/input/input26
EXT3-fs (dm-0): using internal journal
fuse init (API version 7.20)
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs (md0): using internal journal
EXT3-fs (md0): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-3): using internal journal
EXT3-fs (dm-3): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-1): using internal journal
EXT3-fs (dm-1): mounted filesystem with ordered data mode
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
XFS (dm-2): Mounting Filesystem
XFS (dm-2): Ending clean mount
e1000e 0000:02:00.0: irq 73 for MSI/MSI-X
e1000e 0000:02:00.0: irq 73 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
e1000e: eth3 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:02:00.0 eth3: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready